Ancrage au sol pour base de poteau
Ancrage au sol pour poteau de pergola
SECTION 1
Connect the two Christmas tree-looking pieces and slide them in through the top opening of the SOLO base bracket until the tabs of the anchor rest on the inside base of the SOLO (where the wood would rest if the anchors were not used).
SECTION 2
Next, place the square piece that came with the anchors on top of the crossed tree pieces of the anchor inside the SOLO bracket, this prevents the lumber from digging into the anchors.
SECTION 3
Depending on how hard the dirt/earth is, you can use a mallet on a scrap piece of lumber at least 18" in length (so the end that you will be hitting with the mallet is not close to the top of the Solo bracket) to assist with pounding the anchor into the ground.
*For harder earth/dirt, wet thoroughly before you begin.
They are not meant to be used in gravel type ground/surfaces.
Tutoriels étape par étape pour une configuration facile
Obtenez des instructions étape par étape pour l'assemblage de nos pergolas modulaires et durables. Conçus pour les bricoleurs, nos guides simplifient et simplifient l'assemblage.
